#1 Acrylic Source for Construction
 
 
White Acrylic Membrane Cools and Protects

Acid Rain Resistant Acrylic Roof Coating

 roofs,roofing,white roof,roof shingles,roof coating,roof repair,flat roof,roof materials,paint,mold,algae,waterproofing,UV, elastomeric,rubber,concrete,wood,protection

ASA 606 acrylic-urethane roof coating is a one-part elastomeric cross linking latex copolymer emulsion that is air and UV curing.  It is a chemical resistant, waterproof coating formulated for use on roof decks.

ASA 606 was designed to be applied with brush, roller or airless spray. It adheres well over aged galvanized and metal roofs, wood, shingle roofs, built-up roofs with dried-out asphalt or aluminum coatings, urethane and polystyrene foam insulation, polyester plastic panels, precast flat concrete, flat and barrel cement tiles and many single ply roofing materials.

ASA 606 is a proven life extender for aged EPDM roofs.

Super Heat Reflection

LIGHT AND HEAT REFLECTIVE

ASA 606 dramatically reduces solar heat absorption in either air conditioned or Non-air conditioned buildings. It takes the majority of the heat load off a building's skin and reduces temperatures to approximately that of outside shade.

ASA 606 minimizes thermal shock, surface expansion and subsequent roof deterioration thus prolonging building life.

Note: ASA 606 has a negligible effect on heating costs in the winter because of the sun's low angle of incidence.

UNPARALLELED QUALITY

Our Unique Acrylic resin is manufactured exclusively for ASA 606. Not available from any other manufacturer. High quality silica and titanium dioxide fillers provide super chemical resistance and light reflectivity.

Contains NO calcium carbonate. Fully resistant to acid rain, cooking fats, jet exhaust and other environmental contaminates.

ASA 606 removes concerns about safety. It contains no solvents for low environmental impact. Only 25 gm/L VOC's, well under the 250 gm/L allowed by the most restrictive environmental regulations. Contains no lead or other heavy metals. Wet coating is easily removed from hands and tools with soap and water.

Barrel Roof Protection
 roofs,roofing,white roof,roof shingles,roof coating,roof repair,flat roof,roof materials,paint,mold,algae,waterproofing,UV, elastomeric,rubber,concrete,wood,protection
Application      Quantity Calculator
 roofs,roofing,white roof,roof shingles,roof coating,roof repair,flat roof,roof materials,paint,mold,algae,waterproofing,UV, elastomeric,rubber,concrete,wood,protection

Acrylic Roofing Physical Properties

Note: The numbers below are slightly low. In 2006 we modified the ASA 606 product to increase the urethane content to 10%. This produces a stronger film with longer life and improved dirt pickup resistance.

Film Former
(non-fibered acrylic)
Dry Weight: 30% min
Dry Volume: 54% min
Solids:71% by weight
57.3% by Volume
Adhesion
180° peel test
tensile lbs./in.
Glass16.5 - 20.00
Ceramic tile16.5 - 20.00
Aluminum16.0 - 18.00
Steel16.0 - 18.00
Yellow Pine22.0 +
Tensile Strength:
With 1 ply polyester fabric
With 2 ply polyester fabric
 400 psi
2000 psi
4000 psi
Percent Elongation450
Hardness
Shore A  @ 68° F
27.2
Flash PointNONE
Environmental codes:  conforms to all present environmental codes such as
L.A. Rule 66 and Philadelphia Reg. V
Resistance to wind driven rain
according to F.S.#TT-C555B Sec. 3.3.3
No penetration of water.
Moisture resistance
according to Federal Test Method Std. No.2051, Procedure B
No loss of adhesion, discoloration, blistering, cracking or flaking.
Moisture Vapor Permeability
according to F.S. #TT - C555B Sec. 4.4.8
1 or 2 perms
exceeds minimum requirement of 0.4 perms
Electrical resistivity, volume ohm-cm.
ASTM D-257: 50%RH 23°C
2" disc -- 0.1 in. thick
1.9 x 1014
Flexibility:  1/2 inch rodto minus 30°F
Recovery
from 100% extension after 5 min.
96.6%
Fuel and oil resistanceExcellent
Acid and alkaline resistanceExcellent
Moisture vapor Transmission
ASTM E-96
0.322 perms
UV resistanceExcellent
No deterioration after 3,000 hrs. in weatherometer.
And a lot longer on a multitude of roofs!
Fire Retardance
ASTM E-84
Flame spread factor - - - 15
Fuel contributed factor - 10
Cool systems for hot cities
Article in: Professional Roofing Magazine
"Reflections on a Cool Roof"
by Richard Fricklas, RIEI Spring 1999
Heat Island Group: Cool Roofs

Ideal for protecting roofs subject to cooking fats, ie., restaurants, bakeries and similar facilities.

  Can Reduce Air Conditioning up to 40%
Pays for itself in 3 to 8 years
Patented Application System
US Patent #4,870,796
"We installed ASA 606 on our
mobile home roof.  Previously the
central air conditioner couldn't
keep up.  Our home is now cool
on the hottest summer days and
our electric bill has decreased
 by 20 per cent.
  M.W.,  Vienna, Illinois
An ASA 606 fastened roof system is available that features stress relieving properties for domes, large roofs and high wind areas.
Metal Oil Storage Tank Roof Application
 roofs,roofing,white roof,roof shingles,roof coating,roof repair,flat roof,roof materials,paint,mold,algae,waterproofing,UV, elastomeric,rubber,concrete,wood,protection
Application      Quantity Calculator      Physical Properties  roofs,roofing,white roof,roof shingles,roof coating,roof repair,flat roof,roof materials,paint,mold,algae,waterproofing,UV, elastomeric,rubber,concrete,wood,protection
Wonder25 is a high performance acrylic system is supported by a 28% urethane graft.
Think of it as Liquid Siding to compliment your acrylic roof.
#1 Acrylic Source for Construction
 
 
REFER US
Tell a Friend!
  

roofs,roofing,white roof,roof shingles,roof coating,roof repair,flat roof,roof materials,paint,mold,algae,waterproofing,UV, elastomeric,rubber,concrete,wood,protection
WonderChem Navigation Center
Page Navigator Site Search
then


ASA 606 NuKlear ASA 603 Microbes Cleaners-Tools Contact Order Now
roofs,roofing,white roof,roof shingles,roof coating,roof repair,flat roof,roof materials,paint,mold,algae,waterproofing,UV, elastomeric,rubber,concrete,wood,protection
Bookmark and Share

Peace
September 26, 2013

Contact the
©WonderChem 1999-2024